[Bldg-sim] eQuest camera view

[W. Peter Anderson]

Thanks, I have been wondering about this too for months.

Regards,
peter
  ----- Original Message ----- 
  From: Howe, Timothy 
  To: James Hansen ; bldg-sim at lists.onebuilding.org 
  Sent: Thursday, May 15, 2008 3:24 PM
  Subject: Re: [Bldg-sim] eQuest camera view


  ctrl plus left click rotate

  ctrl plus right click zoom in and out

  click "w" for wire frame 

  click "s" for solid



  Timothy Howe, MS, LEED AP
  Mechanical Engineer
  Stantec


------------------------------------------------------------------------------
  From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of James Hansen
  Sent: Thursday, May 15, 2008 3:14 PM
  To: bldg-sim at lists.onebuilding.org
  Subject: [Bldg-sim] eQuest camera view


  I apologize if this has been discussed before, but I couldn't find it in the archives.

  Is there a way to rotate the camera view of the 3D model in eQuest (detailed mode)?  

  Or does the model always set up the 3D view so that you're looking at what would be considered the "plan south" view of the building based on the X,Y coordinates entered for the floor polygon vertices?

  Thanks!

  GHT Limited
  James Hansen, PE, LEED AP

  Senior Associate

  1010 N. Glebe Rd, Suite 200

  Arlington, VA  22201-4749

  703-338-5754 (Direct)

  703-243-1200 (Office)

  703-276-1376 (Fax)

  www.ghtltd.com




------------------------------------------------------------------------------
  The information contained in this communication is confidential, may be privileged, and is intended only for the use of the addressee.  It is the property of GHT Limited.  Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify me immediately by return e-mail or by e-mail to ght at ghtltd.com, and destroy this communication and all copies thereof, including all attachments.  Thank you. 



------------------------------------------------------------------------------


  _______________________________________________
  Bldg-sim mailing list
  http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
  To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080523/0d1e0800/attachment-0002.htm>