[Bldg-sim] DOE-2 INP file to Radiance RAD file
kevin kyte
k1kyte at gmail.com
Wed Aug 26 05:14:38 PDT 2009
The issue that arises is DOE2 geometry is only 2D. So if DrawBDL is not a
2D to 3D converter you would need to write a ruby subscript in order to
accommodate. Once you can get the inp* geometry to idf* (2D to 3D) it
should be no problem. There might be something on the internet that may do
such a thing, but programmers that know how do to such a thing would
probably only take a few days or less to figure it out.
---------- Forwarded message ---------- From: Ramana Koti <
ramana.koti at gmail.com>
To: Bldg-Sim <bldg-sim at lists.onebuilding.org>
Date: Mon, 24 Aug 2009 14:46:40 -0700
- Subject: [Bldg-sim] DOE-2 INP file to Radiance RAD file
Dear all,
Has anyone tried to utilize geometry information from an existing
eQUEST/DOE-2 model's input file to create geometry for a Radiance
daylighting model in the *.RAD file format? (without having to build the
geometry again from scratch I mean)
Theoretically I could come up with the following route but haven't tested it
yet:
Export *.INP to *.IDF using DrawBDL –> open the IDF file using OpenStudio in
Sketch UP --> export to Radiance file format *.RAD using the Sketch Up
plugin SU2RAD.
Any ideas? Thanks,
Ramana Koti
Associate Project Manager
HESCHONG MAHONE GROUP, INC.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090826/89d68c97/attachment-0001.htm>
More information about the Bldg-sim
mailing list