[Bldg-sim] modeling openings in Design Builder
Mahabir Bhandari
bhandari at designbuildersoftware.com
Wed Aug 12 08:59:04 PDT 2009
Deepa,
You can send your dsb model to me (Not to the mailing list) and I will have
a look at it. You may want to use the DesignBuilder Forum for DesignBuilder
related queries (link below).
http://www.designbuilder.co.uk/component/option,com_forum/Itemid,25/page,vie
wforum/f,1/sid,ef743977c79054d0f757fd985e2ee045/
regards,
Mahabir Bhandari
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of deepa
chandrashekaran
Sent: Wednesday, August 12, 2009 12:58 AM
To: Bldg-Sim
Subject: [Bldg-sim] modeling openings in Design Builder
Hello All,
I am working with Design Builder and trying to run simulations for a
building using natural ventilation. While building the model, I introduced
custom openings on the external façade.
I ran two simulations using only natural ventilation. One with all windows
closed and the other with 80% open. I input this setting in the Operation
slider bar within the Openings tab. I was expecting the operative
temperature to increase when the windows were closed. But both simulations
had the same results.
I am not sure if there is way to model to openings. The Operation option
was available only under the Internal windows menu and not for the external
window.
Would be helpful if anybody could suggest possible solution for this.
Thanks in advance,
Deepa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090812/743f7851/attachment-0002.htm>
More information about the Bldg-sim
mailing list