[Bldg-sim] 90.1 Appendix G heating with no cooling on Trace 700

[Nick Anderson]

The building is 1.5 million square feet, so 90.1 requires chilled water
for the cooling system.  

 

"Also, you can change your cooling schedule to something unreasonably
high like 95 degrees, then the cooling should never come on.  As far as
I know, this is a legitimate as ASHRAE and LEED do not mandate what
temperatures should be used."

 

I had tried setting the cooling coils to zero capacity and also setting
the T-stat so that no cooling was required.  But then it comes up with
no heating system airflow because it uses the cooling system as a basis
for heating system airflow calculations.

 

Good thought though...

 

Nick Anderson

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090105/a90030a4/attachment-0001.htm>