[Bldg-sim] Demand ratchets on sub meters

John Aulbach jra_sac at yahoo.com
Sat Jan 17 17:50:49 PST 2009


Jill:
 
I believe eQuest can apply different rates to different meters. Even if the rates are set up the same, call your second Rate "-2" or something, but set them up as different rates, even if they are exactly the same in content. Then apply the individual rates, with the individual ratchets, taxes, etc., to the individual meters. 
 
It should work.

--- On Thu, 1/15/09, Jill Dalglish <Jill at ambient-e.com> wrote:


From: Jill Dalglish <Jill at ambient-e.com>
Subject: [Bldg-sim] Demand ratchets on sub meters
To: bldg-sim at lists.onebuilding.org
Date: Thursday, January 15, 2009, 9:02 AM








Hello,
 
I am modeling two separate buildings in eQuest in one model and need to apply an electrical coincident demand ratchet to each separately? The coincident demand ratchet is different from the facility demand ratchet in that the times of the coincident demand are set by the utility whereas the facility demand ratchet is just whenever the building peaks. 
 
I have set up and applied this coincident demand to the main electrical meter and have set up submeters for the two buildings but don’t know if eQuest can apply this ratchet to the submeters. 
 
Thanks in advance for your help!
Jill
 
 






Jill Dalglish, LEED-AP
130 W. 5th Avenue, Denver, CO 80204 
(NOTE NEW ADDRESS)
t 303.278.1532x205 | f 303.278.8533 | ambient-e.com
 
 
 
 
 
 
-----Inline Attachment Follows-----


_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090117/aacc2652/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4935 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090117/aacc2652/attachment-0001.jpeg>


More information about the Bldg-sim mailing list