[Bldg-sim] IES VE Ground setting Profile

CARNEY Ronan Ronan.CARNEY at projectservices.qld.gov.au
Wed Jan 21 14:54:48 PST 2009


Gustav,
 
The temperature for the ground is taken from the weather file. If you edit the weather file, you can input the ground temperature for the nominated days that are in the weather file.
 
And yes, we are using IES here and have found it quite good.  
 

Regards, 
Ronan Carney 

Electrical Engineer 
Project Services 
Department of Public Works, 
Level 5B, 80 George St, 
Brisbane. QLD4000 
Ph: 3224 5983 
Fax: 32246151 
Email: ronan.carney at projectservices.qld.gov.au <mailto:ronan.carney at projectservices.qld.gov.au>  
Web: www.projectservices.qld.gov.au <http://www.projectservices.qld.gov.au/home/home.asp>  





 

________________________________

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Gustav Jansson
Sent: Thursday, 22 January 2009 7:45 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] IES VE Ground setting Profile



Hi!

 

Wundering about settings for ground properties in  IES VE. How is the calculations done, with a special formula or with outside air, normal climate file? It´s possible to set a temperature profil but how are the calculations being done? 

 

How are you, other IES-users doing with this issue?

 

Best regards

 

Gustav Jansson

 

 

AKJENERGISTRATEGI

B: Östhammarsgatan 71, Stockholm

P: Box 265, 651 07 Karlstad

Telefon 054-18 70 85

Telefax 054-21 03 21

Gustav Jansson

Mobil 070 670 03 12

Gustav.jansson at akj.se <mailto:Gustav.jansson at akj.se> 

 

A K J Energiteknik AB

Org.nr 55 62 61 - 29 10, säte Karlstad

www.akj.se <http://www.akj.se> 

	

 


***************************** Disclaimer *****************************

The contents of this electronic message and any attachments are intended only for the addressee and may contain privileged or confidential information. They may only be used for the purposes for which they were supplied. If you are not the addressee, you are notified that any transmission, distribution, downloading, printing or photocopying of the contents of this message or attachments is strictly prohibited. The privilege of confidentiality attached to this message and attachments is not waived, lost or destroyed by reason of mistaken delivery to you. If you receive this message in error please notify the sender by return e-mail or telephone.

Please note: the Department of Public Works carries out automatic
software scanning, filtering and blocking of E-mails and attachments (including emails of a
personal nature) for detection of viruses, malicious code, SPAM, executable programs or content it deems
unacceptable. All reasonable precautions will be taken to respect the privacy of
individuals as outlined in the DPW Privacy Plan. Personal information will only be used for official
purposes, e.g. monitoring Departmental Personnel's compliance with Departmental Policies.
Personal information will not be divulged or disclosed to others, unless as required by Departmental
Policy and/or State or Commonwealth Law.

Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090122/3c1a3bca/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 167 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090122/3c1a3bca/attachment-0001.png>


More information about the Bldg-sim mailing list