[Bldg-sim] IES VE Ground setting Profile

Chris Yates chris at zed-uk.com
Wed Jan 21 15:34:32 PST 2009


Not strictly true. IES applies outdoor Db temp to ground construction.
The constructio itself is modified to take account of area and  
perimeter.
Chris

Sent from my iPhone

On 21 Jan 2009, at 22:54, "CARNEY Ronan" <Ronan.CARNEY at projectservices.qld.gov.au 
 > wrote:

> Gustav,
>
> The temperature for the ground is taken from the weather file. If  
> you edit the weather file, you can input the ground temperature for  
> the nominated days that are in the weather file.
>
> And yes, we are using IES here and have found it quite good.
>
> Regards,
> Ronan Carney
>
> Electrical Engineer
> Project Services
> Department of Public Works,
> Level 5B, 80 George St,
> Brisbane. QLD4000
> Ph: 3224 5983
> Fax: 32246151
> Email: ronan.carney at projectservices.qld.gov.au
> Web: www.projectservices.qld.gov.au
>
>
>
>
>
>
>
> From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org 
> ] On Behalf Of Gustav Jansson
> Sent: Thursday, 22 January 2009 7:45 AM
> To: bldg-sim at lists.onebuilding.org
> Subject: [Bldg-sim] IES VE Ground setting Profile
>
> Hi!
>
>
>
> Wundering about settings for ground properties in  IES VE. How is  
> the calculations done, with a special formula or with outside air,  
> normal climate file? It´s possible to set a temperature profil but h 
> ow are the calculations being done?
>
>
>
> How are you, other IES-users doing with this issue?
>
>
>
> Best regards
>
>
>
> Gustav Jansson
>
>
>
> <image001.png>
>
> AKJENERGISTRATEGI
>
> B: Östhammarsgatan 71, Stockholm
>
> P: Box 265, 651 07 Karlstad
>
> Telefon 054-18 70 85
>
> Telefax 054-21 03 21
>
> Gustav Jansson
>
> Mobil 070 670 03 12
>
> Gustav.jansson at akj.se
>
>
>
> A K J Energiteknik AB
>
> Org.nr 55 62 61 – 29 10, säte Karlstad
>
> www.akj.se
>
>
>
> ***************************** Disclaimer *****************************
>
> The contents of this electronic message and any attachments are  
> intended only for the addressee and may contain privileged or  
> confidential information. They may only be used for the purposes for  
> which they were supplied. If you are not the addressee, you are  
> notified that any transmission, distribution, downloading, printing  
> or photocopying of the contents of this message or attachments is  
> strictly prohibited. The privilege of confidentiality attached to  
> this message and attachments is not waived, lost or destroyed by  
> reason of mistaken delivery to you. If you receive this message in  
> error please notify the sender by return e-mail or telephone.
>
> Please note: the Department of Public Works carries out automatic  
> software scanning, filtering and blocking of E-mails and attachments  
> (including emails of a personal nature) for detection of viruses,  
> malicious code, SPAM, executable programs or content it deems  
> unacceptable. All reasonable precautions will be taken to respect  
> the privacy of individuals as outlined in the DPW Privacy Plan.  
> Personal information will only be used for official purposes, e.g.  
> monitoring Departmental Personnel's compliance with Departmental  
> Policies. Personal information will not be divulged or disclosed to  
> others, unless as required by Departmental Policy and/or State or  
> Commonwealth Law.
>
> Thank you.
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090121/59c76a9d/attachment-0002.htm>


More information about the Bldg-sim mailing list