[Bldg-sim] LEED Mid rise residential
Abaza Hussein
ahussein at spsu.edu
Thu Oct 29 14:58:23 PDT 2009
Hi
What is the difference between the prerequisite Energy ant Atmosphere in LEED for Homes Mid-rise and single homes or LEED NC? is the 14% better than code a perquisite and does it have to be above the ASHRAE 90.1-2004 , Appendix G.
Any help is greatly appreciated
----- Original Message -----
From: "Alan Jackson" <ajackson at klingstubbins.com>
To: "EnergyPlus Support" <EnergyPlus_Support at yahoogroups.com>
Cc: bldg-sim at lists.onebuilding.org
Sent: Thursday, October 29, 2009 1:09:16 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Bldg-sim] [EnergyPlus_Support] I need advices for choosing a GUI
In what sense?
If you mean it doesn’t have every single capability of modeling like the IDF or Text editor would, yes. But nothing does. It’s hard to keep up with the E+ developer cycle ;-)
If you mean it doesn’t run off Energyplus 3.0. It does.
I don’t use it because it’s too expensive. I prefer OpenStudio and the IDF Editor/Textpad because you have access to all the capabilities that E+ has to offer, but it took me years to become even semi comfortable (read: confident) with modeling through a txt file.
Either way maybe this should be moved over to BLDG-SIM.
Alan Jackson, LEED AP
KlingStubbins
From: EnergyPlus_Support at yahoogroups.com [mailto:EnergyPlus_Support at yahoogroups.com] On Behalf Of Emanuele Naboni
Sent: Thursday, October 29, 2009 1:03 PM
To: EnergyPlus_Support at yahoogroups.com
Subject: Re: [EnergyPlus_Support] I need advices for choosing a GUI
Yes, but Hevacomp does not have the capabilities of EnergyPlus.
--
Emanuele Naboni
per l'Italia: 346.4133337
from US: +39.346.4133337
skype: emanuelenaboni
MArch, PhD Building Science, LEED AP, EU licensed architect
Please consider the environment before printing this email.
2009/10/29 Jackson, Alan < ajackson at klingstubbins.com >
You should look into Hevacomp which is being revamped for the US.
Alan Jackson, LEED AP
KlingStubbins
From: EnergyPlus_Support at yahoogroups.com [mailto: EnergyPlus_Support at yahoogroups.com ] On Behalf Of Josh K
Sent: Thursday, October 29, 2009 12:00 PM
To: EnergyPlus_Support at yahoogroups.com
Subject: Re: [EnergyPlus_Support] I need advices for choosing a GUI
Hello;
My feeling is that their currently is not a *perfect* GUI for EnergyPlus, especially if you're interested in interoperability (ie IFC, gbXML, etc). Designbuilder seems to be getting closest in this regard, but when I tested it a while ago I found the modelling interface to be a bit clumsy and restrictive. OpenStudio is not bad, but still needs a little work to be practical for every day use (for instance, to my knowledge there is currently no good way to specify a heat transfer surface's adjacency conditions). I currently use ECOTECT, which had a lot of promise when I started using it three years ago but has progressed exactly zero since then. I don't know much about the other system you mention.
To summarize: the three you mention will all probably work for you, and each have their own advantages and disadvantages. If you're specifically interested in IFC compatibility, I'm not sure about the status of DesignBuilder in this respect, but neither OpenStudio nor ECOTECT currently have this capability.
Josh
On Thu, Oct 22, 2009 at 7:14 AM, bcavallier < bruno.cavallier at femto-st.fr > wrote:
Hello,
I want to learn EnergyPlus but I need a GUI. As it is a new activity for me, I would like to find the better couple [E+/GUI] regarding my needs. I am mainly interested in building energy simulation, particularly on the topics of energy efficiency and the smart use of solar energy for solar passive designing. I saw a lot of software on the web : Google Sketch Up with Openstudio, Designbuilder (well described at Harvard), Ecotect...
How can I make the best choice? My choice will use the IFC standard. I saw another software : Digital Project of Gehry Technologies which is based on Catia (Dassault Systemes) that works with IFC standards, but has anyone made simulation with [E+/this soft]?
Could you give me advices, please...
Best regards
B.Cavallier
--
Josh Kjenner, P.Eng., LEED AP
Manasc Isaac Architects Ltd.
10225 100 Avenue :: Edmonton, AB T5J 0A1
780.429.3977
--
Emanuele Naboni
per l'Italia: 346.4133337
from US: +39.346.4133337
skype: emanuelenaboni
www.emanuele-naboni.com
sustainable design consultant - consulente per la sostenibilita' di tecnologie, edifici e citta'
MArch, PhD Building Science, LEED AP, EU licensed architect
Please consider the environment before printing this email.
__._,_.___
Messages in this topic ( 5 ) Reply (via web post) | Start a new topic
Messages | Files | Photos | Members
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Recent Activity
· 30
New Members
· 6
New Files
Visit Your Group
Give Back
Yahoo! for Good
Get inspired
by a good cause.
Y! Toolbar
Get it Free!
easy 1-click access
to your groups.
Yahoo! Groups
Start a group
in 3 easy steps.
Connect with others.
.
__,_._,___
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Bldg-sim
mailing list