[Bldg-sim] Electricty produced by DG Set ; no grid connection

[ankur khandelwal]

Carol,

DG Sets are Diesel Generators, uses Diesel as fuel to produce the
electricity.

If I use the Diesel Generator which produces the electricity for all
building end-uses for the Base Case, then what efficiency should I used. Is
any parameters are specified by the ASHRAE for electricity generators.

Ankur

On Sat, Dec 4, 2010 at 5:20 AM, Carol Gardner <cmg750 at gmail.com> wrote:

> Ankur,
>
> I have not run across the term DG set before and am not sure what a bill
> for them would look like. Can you give us a little more information about
> how the DG sets operate and how they are billed?
>
> In any case, you should use the same utility, DG sets, schedule for both
> the base case and proposed buildings.
>
> Carol
>
>   On Fri, Dec 3, 2010 at 3:53 AM, ankur khandelwal <mnitankur at gmail.com>wrote:
>
>>   Dear All,
>>
>>
>>
>> In one of our project the electricity to run all the building uses is
>> produced by the DG set with in the building Campus. The grid electricity is
>> not available at the site and the DG sets are used to produce the
>> electricity for the building end-uses.
>>
>>
>>
>> How should I compare the end-use energy cost of Ashrae BaseCase and my
>> Proposed Case?
>> Should I take the Ashrae BaseCase also running with DG sets and finally
>> compare the cost with diesel to diesel only .
>>
>> Ankur Khandelwal
>>
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101204/86990789/attachment-0002.htm>