[Bldg-sim] eQuest: Partial Insulated Wall?

[John Aulbach]

Yeah - two walls. Make the whole wall in the Wizard, then separate them in the Detail Edit mode.

The Wizard actually gets in the way of this one, as I used to make multiple walls with X-Y-Z cooridinates all the way back to DOE-2.1A (quill pen days, folks)..




________________________________
From: Josh Greenfield <JGreenfield at primerachicago.com>
To: bldg-sim at lists.onebuilding.org
Sent: Tue, January 19, 2010 12:05:13 PM
Subject: [Bldg-sim] eQuest: Partial Insulated Wall?


I have a 12’ height vertical exterior wall…from 0’ to 6’ it’s un-insulated…from 6’ to 12’ in height it’s insulated…any suggestions on how to model this in eQuest?  
 

Josh Greenfield, PE, REP, LEED AP
Energy Services Manager
Associate Vice President
312.242.6392 Direct
jgreenfield at primerachicago.com
Primera Engineers, Ltd.


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100119/d910609c/attachment-0002.htm>