[Bldg-sim] Chiller Efficiency

[amit bhansali]

Well, the baseline COP are measured at standard testing conditions. So i am
not debating the fact the COP would be constant. I just needed to know that
what does increase in 25% efficiency actuallu mean. I personally thought
having a chiller whose kw/ton was lower than that recommended  by ASHRAE
90.1 would be good. Needed to confirm that.

Thanks  for the input

On 25 March 2010 11:51, Kimball, Matthew <Matthew.Kimball at jacobs.com> wrote:

>  Maybe you can tell me what the COP of a chiller means then, given that it
> varies with load, how do you come up with a single COP for a chiller?  Or is
> it just the average COP given the operating conditions that the chiller
> experiences?  Or are you talking about the integrated part load value?
>
> But yes, however you define the efficiency, (COP, EER, or Power/Ton), I am
> geussing that the load removed per unit of input will have to increase by
> 25%.
>
> Matthew Kimball
>
>
>  ------------------------------
>  *From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
> bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *amit bhansali
> *Sent:* Thursday, March 25, 2010 11:49 AM
> *To:* bldg-sim at lists.onebuilding.org
> *Subject:* [Bldg-sim] Chiller Efficiency
>
>
> Hi Bldg-Sim Community,
> I had a confusion that you all might be help out.
> When someone says that they want a chiller with 25% more efficiency than
> the baseline dictated by ASHRAE 90.1, does it mean the COP should be 25%
> greater?
> --
> Thanks
>
> Sincerely,
> Amit Bhansali, M.S. , EIT
> Command Commissioning, LLC
> 8410, Sterling St
> Irving, TX  75063
>
> www.command-cx.com
>
> Please do not print this e-mail unless necessary
>
>
> NOTICE - This communication may contain confidential and privileged
> information that is for the sole use of the intended recipient. Any viewing,
> copying or distribution of, or reliance on this message by unintended
> recipients is strictly prohibited. If you have received this message in
> error, please notify us immediately by replying to the message and deleting
> it from your computer.
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Thanks

Sincerely,
Amit Bhansali, M.S. , EIT
Command Commissioning, LLC
8410, Sterling St
Irving, TX  75063

Office :(972)-929-1199 (Ext:328)
Mobile: (+1)972-207-5180
            (+1)405-312-1047

www.command-cx.com

Please do not print this e-mail unless necessary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100325/479666bc/attachment-0001.htm>