[Bldg-sim] External shading device design tool
Jeff Haberl
jhaberl at tamu.edu
Sun Aug 21 15:30:02 PDT 2011
Kate,
I'll be posting a copy to an FTP site for SBSE to use next year. We recently had to recompile a 32 bit version to run under Windows 7. So, I'll post both.
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)8=?
Jeff S. Haberl, Ph.D.,P.E., FASHRAE..............jhaberl at tamu.edu
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)8=0
________________________________
From: Kate Turpin [katet at serapdx.com]
Sent: Sunday, August 21, 2011 4:23 PM
To: Jeff Haberl
Subject: RE: [Bldg-sim] External shading device design tool
Hi Jeff – your SOLRPATH software sounds useful – where can I download a copy?
Thanks,
Kate
Kate Turpin, PE, LEED AP BD+C
www.serapdx.com<http://www.serapdx.com/>
503.445.7311
From: Jeff Haberl [mailto:jhaberl at tamu.edu]
Sent: Saturday, August 20, 2011 2:03 PM
To: 'JH Choi'; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] External shading device design tool
FYI:
I still am handing out free copies of the SOLRPATH software if you are interested. It basically shows the shading of external devices on the sunpath with a shading mask protractor.
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)8=?
Jeff S. Haberl, Ph.D.,P.E., FASHRAE.............. jhaberl at tamu.edu<mailto:jhaberl at tamu.edu>
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)8=0
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of JH Choi
Sent: Saturday, August 20, 2011 1:00 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] External shading device design tool
Dear Colleagues,
I am looking for a software for external shading device design.
I can recall a software that I used long time ago, which has a visual interface to show a size of overhang / fin based on input. Unfortunately, I cannot remember the name.
Please recommend any software which has similar functions.
Thanks in advance,
Bryan
________________________________
DISCLAIMER:
This message and any attachments are intended for the sole use of the
individual or entity to whom it is addressed. It may contain information that
is privileged, confidential, and / or exempt from disclosure under applicable
law. If you are not the intended recipient, you are hereby notified that you
may not use, copy, disclose, or distribute this message or any information
contained within, including any attachments, to anyone. If you have received
this message in error, please immediately advise the sender and permanently
delete the message and any attachments and destroy any printouts made.
Although we have taken steps to ensure that our e-mail and attachments are
free
from viruses, the recipients should also ensure that they are virus free.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110821/06f86efb/attachment-0001.htm>
More information about the Bldg-sim
mailing list