[Bldg-sim] walk in cooler

Hussein Abaza ahussein at spsu.edu
Wed Feb 23 13:43:52 PST 2011


hello; 
I am trying to simulate a walk in cooler in eQuest, but the zone entering supply air temperature under coil capacity/control, cooling control and reset is not allowing me to enter value below 55F. I need to set it up to 25 F. is there a way to overcome this problem. 
thank you for your help 
H. Abaza 
-- Original Message ----- 
From: "Daniel O'Carroll" <daniel.ocarroll at burgessniple.com> 
To: "bldg-sim at lists.onebuilding.org" <bldg-sim at lists.onebuilding.org> 
Sent: Wednesday, February 23, 2011 1:27:29 PM GMT -05:00 US/Canada Eastern 
Subject: [Bldg-sim] eQuest Training Columbus, Ohio 






Intermediate - Advanced eQuest Workshop: Whole Building Analysis using eQUEST 
March 23 rd : 10am – 5pm; March 24 - 25 th : 8am – 5pm 

Dublin Entrepreneurial Center (please visit www.cgbf.org for map & directions to the venue), Dublin, Ohio 



Instructor: Marlin S. Addison, Principal, M.S. Addison & Associates, Tempe, Arizona, and Clinical Assistant Professor, College of Design, Arizona State University. Mr. Addison is a nationally recognized expert in building energy analysis and eQuest. 

Lunch included (please email any dietary preference to meera at cgbf.org ) 



AIA HSW CEUs and PDU credits offered for the three-day program (partial credits are not available) 



Topics covered include: 

Wizard versus Detailed Interface, Strategies and Issues 

Detailed Interface Basics: create, copy, rename, delete components, user defaults & linked components 

Detailed Interface Essentials: Opaque Constructions, Schedules (including priorities among HVAC 

related schedules), Glass Types, Geometry, Shading, Parameters, Expressions, Parametric Processing 

Additional LEED Analysis issues using eQUEST 

DOE-2 simulation methodology basics 

Daylighting 

Utility Tariffs, Meters 

Life-Cycle Costing in eQUEST 

Quality Control Procedures and eQUEST/DOE-2.2 Results Reporting, Hourly Reports 

Modeling Air-side and Water-Side HVAC 

HVAC Sizing Issues (air-side and water-side, design days) 

OA and Exhaust, Demand Control Ventilation 

Ground Source Heat Pumps 

Heat Recovery 

Approximations to : 

Displacement Ventilation 

Dedicated OA Systems 

Chilled Beams 

Variable Flow Refrigerant Systems 

Plant Equipment Control and Load Management 

Equipment Performance Curves 





Registration fees: $ 3 99 (Student price: $299) 

Note: this class will be held subject to a minimum of 20 attendees registering for the class. In the event that CGBF does not receive these many registrations, it will have to re-schedule the class to a later date. In this event, fully paid registered attendees will receive a full refund through a check. Any questions please email: meera at cgbf.org 



Register by clicking here ( https://www.123signup.com/register?id=vfdpv ) 





Note: 
These electronic documents are provided by Burgess & Niple (B&N) as a convenience to our clients. 
The official document is available as a manually signed, initialed, or sealed hard copy. If there is a discrepancy between electronic files and the hard copies, the hard copies shall prevail. 
It is our professional opinion that this electronic information provides information current as of the date of its release. Any use of this information is at the sole risk and liability of the user. The user is responsible for updating information to reflect any changes in the information following the preparation date of this transmittal. 
The delivery of this information in electronic format is for the benefit of the owner for whom the services have been performed. Nothing in the transfer should be construed to provide any right to third parties to rely on the information provided, or that the use of this information implies the review and approval of Burgess & Niple. 

_______________________________________________ Bldg-sim mailing list http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG 

-- 





Dr. Hussein Abaza, Assistant Professor 

Construction Management Department 

SCHOOL OF ARCHITECTURE ’ 

CIVIL ENGINEERING TECHNOLOGY 

And CONSTRUCTION 

1100 South Marietta Parkway , Marietta , GA 30060-2896 

Website: www.spsu.edu/cost Tel: 678-915-3719 Fax: 678-915-4966 

E-mail: ahussein at spsu.edu 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110223/4ebdf25d/attachment-0001.htm>


More information about the Bldg-sim mailing list