[Bldg-sim] LEED 2.2 for manufacturing facility
Marcus Sheffer
sheffer at energyopportunities.com
Tue Mar 29 05:11:54 PDT 2011
It gets problematic for these types of facilities, not on the energy side but in meeting the LEED MPRs. These types of facilities can demonstrate energy savings.
Minimum program requirement #5 says that a LEED project has to have at least 1 FTE occupant.
Marcus Sheffer
Energy Opportunities, Inc/a 7group Company
1200 E Camping Area Road, Wellsville, PA 17365
717-292-2636, <mailto:sheffer at sevengroup.com> sheffer at sevengroup.com
www.sevengroup.com
From: dlombard at earthlink.net [mailto:dlombard at earthlink.net]
Sent: Tuesday, March 29, 2011 12:09 AM
To: Marcus Sheffer; Dru.Crawley at bentley.com
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] LEED 2.2 for manufacturing facility
So does that mean that a building that uses lots of energy to house computers or equipment that needs cooling but DOES NOT have any real occupants (other than those who may go there on occasion to check on the equipment, say less than once a day) can still go for LEED certification?
What energy load then would be used for the LEED energy model since none of the energy load is for occupant comfort? Lighting only?
Thanks,
Debra Lombard, LEED AP, EMIT, EIT
-----Original Message-----
From: Marcus Sheffer
Sent: Mar 28, 2011 3:09 PM
To: Dru.Crawley at bentley.com
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] LEED 2.2 for manufacturing facility
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110329/399e97e9/attachment-0002.htm>
More information about the Bldg-sim
mailing list