[Bldg-sim] Building envelope
leen peeters
l.f.r.peeters at gmail.com
Sun Jan 22 01:08:42 PST 2012
Jeremiah,
it is already a pretty large building. I assume most people are like me ...
really occupied. A small thing can be smached in between, but not something
that might take me 6 to 8 hours to analyse and model. Should we not look
for something smaller? A might be able to get some data on a passive house
in Belgium. Something less than 200 m2, measured during over a year.
Leen
On Sat, Jan 21, 2012 at 9:47 PM, Jeremiah Crossett
<jeremiah at setnrgh2o.com>wrote:
> I have two office buildings with data, including energy star portfolio
> manager data, and actual utility meeter data. Also I have
> architectural data on them. For the one I have three years data on, the
> other only one year. See the attached for the one with the best data and
> let me know if one of these works..
>
> On Sat, Jan 21, 2012 at 11:00 AM, RobertWichert <robert at wichert.org>wrote:
>
>> Now THAT would be a better test than I envisioned, Jon. I was just
>> thinking of comparing models, NOT comparing them to a real building.
>> Sounds like fun though!
>>
>>
>>
>>
>> Robert Wichert P.Eng. LEED AP+1 916 966 9060
>> FAX +1 916 966 9068
>>
>>
>>
>>
>>
>>
>>
>> ===============================================
>>
>>
>> On 1/21/2012 9:15 AM, Jon Broadway wrote:
>>
>> Mr Wichert: And the next question would be , “Where do we find such an
>> existing bldg. with real demand and energy data set already
>> available?.” I would assume that many such exist, but I , for one,
>> would not know how to begin to identify one. Maybe the folks at NREL or
>> LNBL have access to such data, and maybe one from there could kindly
>> respond to your request?****
>>
>> ** **
>>
>> Regards,****
>>
>> Jon A . Broadway****
>>
>> ** **
>>
>> *From:* RobertWichert [mailto:robert at wichert.org <robert at wichert.org>]
>> *Sent:* Friday, January 20, 2012 12:55 PM
>> *To:* Jon Broadway; bldg-sim at lists.onebuilding.org
>>
>> *Subject:* Re: [Bldg-sim] Building envelope****
>>
>> ** **
>>
>> Yes, of course. I was thinking of a non-residential one-story wood
>> frame, steel studs, or concrete block building with one or two windows per
>> side and a cathedral ceiling on a poured slab. A basement would be OK too,
>> but not really necessary. Either no zoning at all or a core for
>> toilets/break rooms and open plan office all around.
>>
>> I mean REALLY simple.
>>
>>
>>
>> ****
>>
>> Robert Wichert P.Eng. LEED AP****
>>
>> +1 916 966 9060****
>>
>> FAX +1 916 966 9068****
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> ===============================================****
>>
>>
>> On 1/20/2012 10:08 AM, Jon Broadway wrote: ****
>>
>> Mr Wichert: Although I like your idea of head-to-head modeling, I think
>> it would only be real useful if one could start with a “simple” bldg. for
>> wahich there was existing good quality energy and demand data set. That
>> way, one could not only have “precision “ but also some baseline of
>> “accuracy”.****
>>
>> ****
>>
>> I like you idea, but to start small and simple would be key for me, so
>> as not to commit a large amount of time.****
>>
>> ****
>>
>> Thanks for your suggestion.****
>>
>> ****
>>
>> Jon Broadway****
>>
>> ****
>>
>> Jon Broadway, Ph.D., P.E. ****
>>
>> Member, US Green Building Council****
>>
>> Member, International Building Performance Standards Association (IBPSA)*
>> ***
>>
>> ****
>>
>> Energy Savers Unlimited****
>>
>> ****
>>
>> 600 South Court St****
>>
>> Suite 305****
>>
>> Montgomery AL 36104****
>>
>> Cell phone 334- 430-0262****
>>
>> ****
>>
>> ****
>>
>> ****
>>
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Jeremiah D. Crossett
> Setanta Energy & Water
> Phone: 503-688-8951
> Email: jeremiah at setnrgh2o.com
> http://www.setnrgh2o.com/
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120122/934faed5/attachment-0002.htm>
More information about the Bldg-sim
mailing list