[Bldg-sim] air flow sensors
Chalfoun, Nader V - (chalfoun)
chalfoun at email.arizona.edu
Tue Jul 3 07:34:23 PDT 2012
Vikram is right. I am successfully using Accusense UAS1000 Series from the company "Degree°C".
http://www.degreec.com/
They come in three ranges:
UAS1100 0.15 – 1.0 m/s (30 - 197 fpm)
UAS1200 0.50 – 5.0 m/s (99 - 985 fpm)
UAS1300 4.50 - 20 m/s (887 - 3940 fpm)
See attached brochure
Nader
Check my new online energy courses http://www.hed-online.com/
--------------------------------------------
Nader V. Chalfoun, Ph.D., LEED© AP, CEA
Professor of Architecture and Environmental Sciences
Director: The House Energy Doctor Program http://houseenergydoctor.arizona.edu/
Chair: Master of Science in Architecture Program
Coordinator: Environmental Education Ph.D. Minor
Faculty: Global Change Ph.D. Minor
Address: University of Arizona
College of Architecture and Landscape Architecture
1040 N. Olive St., Tucson, AZ 85721, U.S.A.
Phone: (520)621-6751 Fax: (520)621-8700
________________________________________
From: bldg-sim-bounces at lists.onebuilding.org [bldg-sim-bounces at lists.onebuilding.org] on behalf of Sami, Vikram [Vikram.Sami at perkinswill.com]
Sent: Tuesday, July 03, 2012 7:16 AM
To: Chris Jones; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] air flow sensors
Could you use a hot wire anemometer?
Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462 f: 404.892.5823 e: vikram.sami at perkinswill.com www.perkinswill.com
Perkins+Will. Ideas + buildings that honor the broader goals of society
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Chris Jones
Sent: Tuesday, July 03, 2012 9:25 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] air flow sensors
I am wondering what kind of air flow sensor one would use to measure the flow through opened windows? This is for a house monitoring projects. I have the DB and WB loggers. Would you do a transverse with a pitot tube? Would a flow hood work?
>>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Bldg-sim
mailing list