[Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk

[Leandro Meneguelli Biondo]

Ok, but it would make more sense if this capability was buit in on both softwares... specially on AECOsim that uses the EP engine... I surely would like to have all the energyplus power for "freedom" on object settings (specially HVAC and green energy) working in parallel to the better interface and automation offered by the simulation suites. Would that be fair?


Leandro M Biondo
Consultor de Eficiência Energética
Meteorologista
Rua Álvaro Rodrigues, 182 - Cj. 153
Brooklin - São Paulo - CEP 04582-000
tel: (11) 2149 0300 Ram.352/cel: (11) 6436 3510
http://www.cte.com.br<http://www.cte.com.br/>




Aviso Legal
Esta mensagem pode conter informações confidenciais e/ou privilegiadas. Se você não
for o destinatário ou a pessoa autorizada a receber esta mensagem, não deve usar, copiar
ou divulgar as informações nela contida ou tomar qualquer ação baseada nessas
informações. Este ambiente está sujeito a monitoramento.

De: Lopez, Phylroy [mailto:Phylroy.Lopez at NRCan-RNCan.gc.ca]
Enviada em: Thursday, May 24, 2012 15:26
Para: Leandro Meneguelli Biondo; bldg-sim at lists.onebuilding.org
Assunto: RE: [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk


Openstudio I think has that capability. If not it is in the works.

________________________________
From: bldg-sim-bounces at lists.onebuilding.org<mailto:bldg-sim-bounces at lists.onebuilding.org> [mailto:bldg-sim-bounces at lists.onebuilding.org]<mailto:[mailto:bldg-sim-bounces at lists.onebuilding.org]> On Behalf Of Leandro Meneguelli Biondo
Sent: May 24, 2012 14:22
To: bldg-sim at lists.onebuilding.org<mailto:bldg-sim at lists.onebuilding.org>
Subject: [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk
This is a simple question that I tought of on the gbXML webinar thinking it would be a basic routine on both Bentley´s AECOsim and Autodesk´s Vasari systems, but haven´s found an answer so far. That is:

How can I import EnergyPlus (5, 6 and 7) idf files with all my current modeling information to the environments? From what I have seen there always is a way to start from a gbXML, but how do I go from a "idf" file to a gbXML or straight to AECO or Vasari?

Also, how do I keep compatibility between my AECO / Vasari simulations and a EnergyPlus model?



[cid:image001.png at 01CD39D2.769E1780]

Leandro M Biondo
Energy Efficiency Consultant
Meteorologist
Rua Álvaro Rodrigues, 182 - Cj. 153
Brooklin - São Paulo - Brasil
tel: (11) 2149 0300 cel: (11) 6436 3510
http://www.cte.com.br<http://www.cte.com.br/>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120524/be394c80/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 3624 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120524/be394c80/attachment-0002.png>