[Bldg-sim] IES VE Dehumidification Question

[Kevin Campbell]

I'm using all prototype systems, and they all have humidity controllers attached to the coil/room when imported.  Looking at those controllers they have a setpoint of 50% RH with a 10% deadband.  I don't know if that's standard with the prototype systems or if it's pulling that from my room conditions tab, but either way everything seems to be pointing to 50% RH.


[Element Logo 4-27-12.png]<http://www.megroup.com/>

KEVIN CAMPBELL, EIT, CxT

ANALYST

t: 402.464.3833 x2129

WE'RE ON OUR JOURNEY TO GREENBUILD 2012!<http://www.megroup.com/index.php/greenbuild2012>

[Signature Twitter]<https://twitter.com/#!/megroup>  [Signature LinkedIn Logo] <http://www.linkedin.com/company/m-e-group>




From: Chris Yates [mailto:chris.malcolm.yates at gmail.com]
Sent: Thursday, February 14, 2013 4:21 PM
To: Kevin Campbell
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] IES VE Dehumidification Question


Difficult to diagnose from your description but certain zone level system settings become redundant when you use aphvac.

Are you using the controllers in aphvac to control humidity via coils or are you expecting aphvac to the "find" settings in your zone "room conditions"tab?

It's not always obvious what settings become redundant.

Sent from my Android device. Please excuse typos, etc.
On 14 Feb 2013 14:16, "Kevin Campbell" <Kevin.Campbell at megroup.com<mailto:Kevin.Campbell at megroup.com>> wrote:
Building Simulation Community -

I'm having issues with humidity in some models I'm running while trying to use ApacheHVAC. I have set my "Maximum Percent Saturation" to 50%, and in the VE ASHRAE Loads Results Data tab of the loads data spreadsheet it shows that max input as 50%. If I go into Vista and highlight my "filename.asp" file for the run that is linked to my ApacheHVAC system and run the "Heating and Cooling Report" and look at the "Comfort - Occupied" section all of my rooms have a Max% Relative Humidity of 85-100%. This is the same if I select "Systems" from the drop down and investigate Relative Humidity on a node by node basis at the rooms in my ApacheHVAC system.

Rooms in my model that are not assigned to an ApacheHVAC system and are left with the default ApacheSystems system show that they are being maintained at 50% RH.

All rooms whether assigned to the ApacheHVAC systems or the default systems show that they're letting room temperatures float to Unoccupied setpoints during the "Comfort - Occupied" times.

Any help on this would be greatly appreciated, the buildings I'm trying to work on are located in Louisville, KY and Tampa, FL so not accounting for dehumidification is going to vastly effect the cooling load.

Thanks,


[Element Logo 4-27-12.png]<http://www.megroup.com/>

KEVIN CAMPBELL, EIT, CxT

ANALYST

t: 402.464.3833 x2129<tel:402.464.3833%20x2129>

WE'RE ON OUR JOURNEY TO GREENBUILD 2012!<http://www.megroup.com/index.php/greenbuild2012>

[Signature Twitter]<https://twitter.com/#!/megroup>  [Signature LinkedIn Logo] <http://www.linkedin.com/company/m-e-group>




________________________________

CONFIDENTIALITY NOTICE: This e-mail and any attached file(s) are intended only for the use of the individual or entity to whom or to which it is addressed and may contain information that is privileged, confidential, proprietary, and trade secret. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or reproduction of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately and discard the original message and any attachment(s).

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG>

________________________________

CONFIDENTIALITY NOTICE: This e-mail and any attached file(s) are intended only for the use of the individual or entity to whom or to which it is addressed and may contain information that is privileged, confidential, proprietary, and trade secret. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or reproduction of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately and discard the original message and any attachment(s).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.jpg
Type: image/jpeg
Size: 2037 bytes
Desc: image007.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.jpg
Type: image/jpeg
Size: 752 bytes
Desc: image008.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0013.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.jpg
Type: image/jpeg
Size: 784 bytes
Desc: image009.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0014.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2037 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0015.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 752 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0016.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 784 bytes
Desc: image006.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130214/66cc587b/attachment-0017.jpg>