[Bldg-sim] 回复: Modelling heating

Rathna Shree rathnashreep at yahoo.in
Thu Mar 26 00:30:52 PDT 2015


Exactly. Thats the reason, i want to model such a way that heating never switches on and even the zone fans (PFP boxes) never comes on. I am not able to exactly figure out how to do that? 


     On Thursday, 26 March 2015 12:52 PM, 冷面寒枪 <503271081 at qq.com> wrote:
   

 Hi,According to Ashrae 90.1-2007 Appendix G Table 3.1.10 d "Where no heating system exists or no heating system has been specified, the
heating system classification shall be assumed to be electric, and the system characteristics shall be identical to the system modeled in the baseline building design."So you can not set the heating as not installed. ------------------Yongqing ZhaoChangsha Green Building & Energy Saving Technology CO.,LTD
NO.438,Shaoshan Road,Changsha,Hunan 
Telephone:13574805636Email:zhaoyongqing1987 at 126.com         503271081 at qq.com  

------------------ 原始邮件 ------------------发件人: "Rathna Shree";<rathnashreep at yahoo.in>;发送时间: 2015年3月26日(星期四) 下午3:16收件人: "Joe Huang"<yjhuang at whiteboxtechnologies.com>; "bldg-sim at lists.onebuilding.org"<bldg-sim at lists.onebuilding.org>;  主题: Re: [Bldg-sim] Modelling heating
Thank you Joe Huang. I am using Equest for the simulation. Can we set the heating as not installed for LEED submissions?



On Wednesday, 25 March 2015 11:59 PM, Joe Huang <yjhuang at whiteboxtechnologies.com> wrote:


It all depends on which simulation program you're using, but all of them should be able to accommodate you very easily.  You can either set the Heating Schedule to be never on, and the Heating Setpoint Temperature to something very low, like 10 C (50 F). 

Joe
Joe Huang
White Box Technologies, Inc.
346 Rheem Blvd., Suite 205A
Moraga CA 94556
yjhuang at whiteboxtechnologies.com
http://weather.whiteboxtechnologies.com for simulation-ready weather data
(o) (925)388-0265
(c) (510)928-2683
"building energy simulations at your fingertips"
On 3/25/2015 2:58 AM, Rathna Shree wrote:

Dear All,
In few of the climatic conditions we work on doesn't require heating at all. The temperature might go little less than 20deg C in winter but heating will definitely not be installed in the project. For these projects, how do we set the heating set point temperatures so that heating never switches on. we are facing issues especially while modelling VAV with PFP boxes in equest (PIU systems). The base case and proposed case heating and fan energy consumption are highly affecting the final savings results. I am looking to avoid this scenario and ensure heating never switches on, therefore zone fans also do not work.
Please guide.
Regards,Rathnashree

 
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG



_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG




  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20150326/40ebdfa6/attachment.htm>


More information about the Bldg-sim mailing list