[EnergyPlus_Support] Outside air controller

[habaza11@xxxxxx]

Thank you for your responce;

E plus manual says  under outside air controller "The outside air
controller includes a number of user selectable limit controls. If any of the selected limits are exceeded, the outside airflow rate is set to the minimum. If all the limits are satisfied, the outside air
controller does the following: if the outside air temperature is greater than or equal to the mixed air temperature set point, the outside air flow rate is set to the maximum; if the outside air temperature
is less than the mixed air temperature set point, the outside air controller will modulate the outside
air flow so that the mixed air temperature will match the mixed air set point temperature."
What about if we set the controller to check just enthalopy. will the above statement be aplicable.
Thank you again.


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Sponsored by VeriSign - The Value of Trust
Pinpoint the right security solution for your company - FREE
Guide from industry leader VeriSign gives you all the facts.
http://us.click.yahoo.com/pCuuSA/WdiDAA/yigFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.eren.doe.gov/buildings/energy_tools/energyplus/

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/