Re: [EnergyPlus_Support] cross mixing air

[Linda Lawrie <linda@xxxxxxxxxx>]

At 06:50 AM 3/20/02, you wrote:
>Hi every body;
>* Under AirFlow, cross mixing, the manual said "Field: Design Level : This 
>number is the maximum amount of mixing expected between the two zones". 
>Does this mean Energy Plus calculates the actual air flow between the two 
>zones or just consider the Design level?.

Since this is a scheduled feature, the design level is modified by the 
Scheduled fraction and that becomes the potential air flow between the two 
zones.

(i.e. if the design level is 30 m3/s and the schedule value for that hour 
is .5 then the actual amount used will be 15 m3/s)

>* In the IDF input file, it says this feature is not tested. are you 
>making any testing on this feature now?.

Yes, we hope to have both mixing and cross mixing working properly in the 
1.0.1 release.

Linda


------------------------ Yahoo! Groups Sponsor ---------------------~-->
FIND OLD SCHOOL FRIENDS and OLD FLAMES
Click here to start your search at Reunion.com today!
http://us.click.yahoo.com/NFsLKA/Dn2DAA/ySSFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/