[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] solar distribution



Dear sir

I have runned several simulations of a straight 3 zone building with 
good results.  I choosed solar distribution=fullEXterior, because  
the geometry was not convex.
After some  minor geometric alterations in order to obtain a convex 
stucture, i changed solar distribution to fullInteriorandExterior and 
obtained these message:

   ** Severe  ** Temperature out of bounds (2807.22) for 
surface=WALLZ1OEST
   **   ~~~   ** occuring in simulation=SUMMER at 08/21 06:15
   **   ~~~   ** A temperature out of bounds problem can be caused by 
several things.  The user
   **   ~~~   ** should check the weather environment, the level of 
internal gains with respect
   **   ~~~   ** to the zone, and the thermal properties of their 
materials among other things.
   **  Fatal  ** EnergyPlus has exited due to the reason stated above
   ************* EnergyPlus Terminated--Fatal Error Detected. 3 
Warning; 1 Severe Errors

Coul´d you send me any suggestion ?


Thank you in advance

JB


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Sell a Home with Ease!
http://us.click.yahoo.com/SrPZMC/kTmEAA/MVfIAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/