[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Interface for input other sources data into the DOE2 and EnergyPlus

Dear all,

I want to carry out a research work about the daylight simulation for DOE2 
and EnergyPlus. But I don't want to use the DOE2 and EnergyPlus to 
calculate illuminance level on the reference points for my project. I want 
to use other daylight models to calculate the illuminance level for the 
reference points first, then input those data into the DOE2 and EnergyPlus, 
then which are used to calculate the energy changes about the daylight 
application. I wonder if you cloud tell how to do this and what the best 
way to achieve my goal are.
Thank you for your kind attention.

S L Wong

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Home Selling? Try Us!

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/