[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Daylighting calculation

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Daylighting calculation
From: Linda Lawrie <linda@xxxxxxxxxx>
Date: Wed, 27 Nov 2002 11:38:33 -0600
Delivered-to: lawrie.com%linda@xxxxxxxxxx
Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
In-reply-to: <641F2A236C10D411B65300805F6FB9FC0251D8D5@nt-comm4>
List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx

At 08:56 AM 11/27/2002, Griffith, Brent wrote:

Clemens

I think you need to use Relative coordinate system (rather than World). It is the only way I have made daylighting work. I think the documentation does need work on this subject.

You must enter any daylighting information in relative coordinates. But, shouldn't need to enter entire geometry that way.

Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to: EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Follow-Ups:
- [EnergyPlus_Support] Version 1.0.3
  - From: Guilherme Carrilho da Graca
- Re: [EnergyPlus_Support] Daylighting calculation
  - From: Clemens Felsmann

References:
- RE: [EnergyPlus_Support] Daylighting calculation
  - From: Griffith, Brent

Prev by Date: RE: [EnergyPlus_Support] Daylighting calculation
Next by Date: Re: [EnergyPlus_Support] still cannot get the result
Previous by thread: RE: [EnergyPlus_Support] Daylighting calculation
Next by thread: [EnergyPlus_Support] Version 1.0.3
Index(es):
- Date
- Thread