[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [EnergyPlus_Support] Daylighting calculation
Clemens
I
think you need to use Relative coordinate system (rather than World). It
is the only way I have made daylighting work. I think the documentation
does need work on this subject.
Brent
Hello Group,
does
really nobody has an explanation to my question from November 22
regarding
daylighting ?
Now there is a new problem: I'm using the same three
rooms as before
(please look at the file area) but with additional
horizontal
orientated windows in the roofs. The area fraction for these
windows
is 60%. The effect of the new windows on daylight illuminance at
the
reference points which always are located in the middle of the rooms
is enormous: Energy+ calculated more than 8*10^7 lx! But in reality
this is not possible, isn't it?
What's wrong
here?
Clemens
To
unsubscribe from this group, send an email
to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary
EnergyPlus web site is found at:
http://www.energyplus.gov
The
group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Your
use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
| Yahoo! Groups Sponsor |
ADVERTISEMENT
![]() | |
![]() |
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.