[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Azimuth angle change in 5ZoneAirCooled.idf

Hello there
I was testing the report meters for the file "5ZoneAirCooled.idf".
Trying to see how E+ behave if I change the azimuth of the file. So, I
changed the angle from 30deg to 180. Guess what happens, I get 3 warning
messages like:

Program Version,EnergyPlus, 27/01/2003 01:28
   ** Warning ** InterZone Surface Azimuth do not match as expected.
   **   ~~~   **   Azimuth=239.9 in Surface=SB15, Zone=SPACE1-1
   **   ~~~   **   Azimuth=14.9 in Surface=SB51, Zone=SPACE5-1
I guess it is because of the trapezoidal shape of zones in 5 zone
examples. Is the problem with wall references: SB15, SB51? 
Thanks in advance.
Monjur M Mourshed
Informatics Research Unit for Sustainable Engineering
National University of Ireland Cork. Ireland.
Web:    <http://www.ecaad.com/monjur> http://www.ecaad.com/monjur
Email :  <mailto:m.mourshed@xxxxxxxxxxx> m.mourshed@xxxxxxxxxxx
            <mailto:monjur@xxxxxxxxx> monjur@xxxxxxxxx

[Non-text portions of this message have been removed]

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/