Antw: Re: [EnergyPlus_Support] Simulation aborted

["Isidor Giglmayr" <isidor.giglmayr@xxxxxxxxxxxxxxxxxxxxx>]

Dear Linda, 

I have had a second look onzo Franz's model and have found a failure concerning the nodes. He has to change the node name in the Zone Equipment:Controlled Zone Equip Coniguration - zone001 - Zone Return Air Name to "Zone001AirOutlet". Than he can simulate all he want - also dry bulb temperatures close to zerro.

Hope this helps

Isidor


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/LIgTpC/vN2EAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/