[EnergyPlus_Support] Thermal Bridging

["unrme <donovan@xxxxxxx>" <donovan@xxxxxxx>]

We are attempting to model a building which is being constructed with 
CFMF. In addition to EnergyPlus we are building a model with mathcad. 
The mathcad model was able to identify the serious issue of thermal 
bridging with this type of construction. It appears that EnergyPlus 
does not address this issue. Should I take the calculated R value 
from mathcad and enter it in EnergyPlus as Material: Regular R? 
Thanks!


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/LIgTpC/vN2EAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/