[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Warning messages for running 3zvent.idf
Dear EnergyPlus users,
When I run the 3zvent.idf, there will be 6 warnings.
I can fix the first four by filling values and defaults.
But for the following two warnings, I need help.
----
Should I change all zone origins to (0,0,0) to correct the warning,
or should I change the Coordinate System to "relative" in
SurfaceGeometry ?
How about the "Orphan Objects" ?
=====Thanks=====
Program Version,EnergyPlus 1.0.3.019, 3/26/2003 9:57 PM
** Warning ** World Coordinate System selected. Some Zone Origins
are non-zero.
** ~~~ ** These will be used in Daylighting:Detailed
calculations but not in normal geometry inputs.
************* Initializing COMIS Solution
************* Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* No node connection errors were found.
** Warning ** The following lines are "Orphan Objects". These
objects are in the idf
** ~~~ ** file but are never obtained by the simulation and
therefore are NOT used.
** ~~~ ** See InputOutputReference document for more details.
************* Object=CROSS MIXING=WEST_ZONE
************* Object=INFILTRATION=EAST_ZONE
************* EnergyPlus Completed Successfully-- 2 Warning; 0
Severe Errors; Elapsed Time=00hr 00min 18sec
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/xaxhjB/hdqFAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/