[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: EnergyPlus Newbie - HVAC help

At 03:35 PM 3/28/2003, jpmark23 wrote:
>Thanks again for your help...two more questions...I don't have the
>FurnaceWithDXSystem.idf file where can I get it?

If you loaded the Example Files when you installed EnergyPlus, it's in the 
"Misc" folder under Example Files.  Doesn't have an associated output like 
some of them, but it should give you some idea.

>  Also, the results
>seem to indicate that my unit heaters and/or unitary system are not
>running b/c winter temperatures are only about 15C.  In the summer
>all temps are higher than environmental as well.  I have thermostats,
>but I'm not sure if they are connected, as the heaters and unitary
>system do not reference them or a zone in any way that I have
>programmed so far.
>Also, I keep getting an error message that demand side inlet pipe
>cannot be found, even though I have it listed as a "PIPE".  Any ideas?

If you want to send me your input file (mailto:linda@xxxxxxxxxx) I'll run 
it through our development version which has a lot of new built in kinds of 
checks that we hope will help find node / loop connection errors.


EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/