Re: [EnergyPlus_Support] illuminance output

[Frederick Winkelmann <FCWinkelmann@xxxxxxx>]

Only the daylight illuminance can be output. However, if the overhead electric lights are on, you can calculate the total
illuminance as follows:

If daylight illuminance <= illuminance set point, total illuminance = illuminance set point.

If daylight illuminance > illuminance set point, total illuminance = daylight illuminance.

Fred Winkelmann

zhaicq98 wrote:

> Hi,
>
> I am wondering if the total illuminance level, instead of daylighting
> illuminance level, can be output from E+ and how?
>
> Thanks!
>
>
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get A Free Psychic Reading!
Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/cjB9SD/od7FAA/uetFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/