[EnergyPlus_Support] DX VAV System

["zhaicq98" <chaoqinz@xxxxxxxxxxxxxx>]

Hi,

I have a system that is exactly the same as that in example file 
5ZoneAutoDXVAV.idf. I also created my input file according to this 
example file. However, it seems that the reheat coil in my single 
duct VAV:reheat does not work. I output the heating coil energy and 
it is always zero. I also output the zone air temperature, and it is 
far below the setpoint. I tried the example file, and it works well 
on my computer. Can anyone give me any information about what the 
problem might be?

Thanks,
Chaoqin



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy 1, Get 1 FREE
Control Cravings & Hunger EZ! Fast Acting Natural Oral Spray - $19.97
http://www.challengerone.com/t/l.asp?cid=2866&lp=ezappetite3.html
http://us.click.yahoo.com/rJIe0D/99VGAA/ySSFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/