[EnergyPlus_Support] high surface temperature

[Hannah Yan <hannahyan@xxxxxxxxx>]

Hi,

I am simulating a natural ventilation environment for
several cooling design days without wind. There are
some thermal mass on the floor but not too much for
walls. I think the air temperature looks good, but
surface temperature and MRT seem a little bit high
than I expected. I suspect this is because E+ has some
special initialization that may influence. What do you
think?

Beside, I found air change rate in .csv output column
BM seems too high and not corresponds to the
infiltration volume in column BL. Is this a bug or
something else?

Thanks,

Hannah Yan
Flack + Kurtz Inc
405 Howard Street, Suite 500
San Francisco, CA 94105-2673
(415) 398-3833 fax (415) 433-5311
hannah.yan@xxxxxxxxx
http://www.flackandkurtz.com




__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com

[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/sOykFB/k9VGAA/ySSFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/