[EnergyPlus_Support] Flow Through Zones

["kirbyschapman" <chapman@xxxxxxx>]

I'm still struggling with the following situation. I have a 
situation where a zone receives air from a supply plenum. That works 
great. The air is then supposed to flow from this zone to two other 
zones. Sort of like an air supply to one room, and then the air 
return located a few rooms away so that the air actually flows 
through these other rooms.

Does anyone have a suggestion on how to configure this? I tried 
working with return plenums, but the limitation comes in the fact 
that they can only have one outlet. I need two...

Thanks for any advice!

Kirby


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/