[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Simple boiler with basebaord heat

I have a 3 zone house with a simple boiler and hot water baseboard 
heat in each zone.  There is no cooling.  I tried to use CVBbRh.imf 
as starting place to set up simple single setpoint heating 
thermostatic control for the 3 zones, but running the macro failed 
with the following message:  (I just opened EP-Launch, selected the 
macro file and clicked "simulate.")

Program Version,EnergyPlus, 9/1/2003 8:48 AM
   ** Warning ** Objects="SKY RADIANCE DISTRIBUTION" have been 
deleted from the IDD.  Will be ignored.
   ** Severe  ** No items found for Required Object=ZONE
   ** Severe  ** No items found for Required Object=SURFACEGEOMETRY
   ** Severe  ** Other miscellaneous errors found in input
   **  Fatal  ** Out of "range" values and/or blank required fields 
found in input
   ************* EnergyPlus Terminated--Fatal Error Detected. 1 
Warning; 3 Severe Errors

Can you help me fix this file, or better yet point me to an example 
file for my simple 3 zone control problem?
Thank you,
Jeb Blakeley

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/