[EnergyPlus_Support] Question about design evaporative volumetric water flow rate

["leeslwong" <bclwong@xxxxxxxxxxxx>]

Dear all,

After simulation the autosizing of an A/C building, which is 6300 kW 
of total cooling capacity. I propose to use 6 nos of 1050 kW of 
chiller for the building. The total evaporative water flow rate is 
273 L/s and the individual chilled water flow rate of 6 nos. of 
chiller is 45.5 L/s. I an planning to input 6 nos of 
CHILLER:ELECTRIC, which is 1050 kW for each chiller for the new input 
file. I wonder if someone could tell me 273 L/s or 45.5 L/s of Design 
Evaporator Volumetric Water Flow Rate {m3/s} should be used for each 
chiller?

Thanks

lee 


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Upgrade to 128-Bit SSL Security!
http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/