[EnergyPlus_Support] subsurface on interzone surface

["waspoorboy" <mingsbox@xxxxxxxxxxxxxx>]

One interzone surface between two zones needs to be defined twice, as 
different surface names for each zone.

For heat transfer purpose,
if I have a door on that interzone surface, the door also needs to be 
defined twice with different names for each of the two zones.
Am I correct ?
Thanks. 

[ps.It is noted in IOref that [For COMIS airflow purpose], 
the door(opening) should be defined only once.]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Upgrade to 128-Bit SSL Security!
http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/