[EnergyPlus_Support] Heat transfer on an open door.

["waspoorboy" <mingsbox@xxxxxxxxxxxxxx>]

A closed door between two thermal zones will have heat transfer.
When using COMIS without HVAC and the door is defined fully open 
for COMIS, the door becomes thermal mass of one of the two zones.

However, in such a case EnergyPlus will still treat the door as a 
heat transfer subsurface.

Any suggestions or solutions to this ?
Thanks,
Ming


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/