[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] People Sensible vs Latent Load

I have two conditioned zones that are maintained at roughly the same comfort conditions.  The latent percentage of the human emitted heat in one of the zones seems fine, roughly varying between 20 to 30%.  Yet my other zone reports the latent percentage at 0 most of the time and at the maximum 1%.  I looked at the engineering document to verify this but the equation does not show how such low latent percentages could appear.  The heat given off in the first zone is 96 W while the second zone is 64 W.  If someone could clear this up I would appreciate it.


[Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/