[EnergyPlus_Support] NV

[Mohit Mehta <mohitmehta1@xxxxxxxxx>]

i have a couple of questions as i am still learning eplus:

how can one check (from what eplus report) if sum of inflows is equal to the sum of outflows in a naturally ventilated building section?

also if the section has vents at different levels how does one know if these are experiencing inflow or outflow? how does eplus calculate and display the neutral pressure level for a tall stack?

energyplus does "Automatic calculation of COMIS wind pressure coefficients for rectangular buildings" but the user is asked to input COMIS CP ARRAY and CP VALUES by wind direction... is this redundant or it uses the user defined values over calculated ones? is it better if i enter zero for all CP values?

thanks, ~m




---------------------------------
Do you Yahoo!?
Get better spam protection with Yahoo! Mail

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/