[EnergyPlus_Support] Loads calculation

["staryhy2000" <staryhy2000@xxxxxxxxxxxx>]

    I simulated the cooling loads of a building without internal 
interference, but some results such as Zone/Sys Sensible Cooling Rate 
and Purchased Air Sensible Cooling Rate equal to zero, why? And 
surface ext convection coeff is about 5, whether is the number too 
low? In report variable, which variable means cooling loads? 
   If I want to simulate a room of a building, how should I set a 
interwall? If the space is very large, how do I divide different 
zones without patitionwall? Where do ground temperatures come from?
   Thank you for your help! 




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/