[EnergyPlus_Support] rel hum output for system nodes

[Christian Struck <Christian.Struck@xxxxxxxxxxxxxxx>]

Dear E+ user,

is there a way of plotting the relative humidity of a system node in E+? I
know about the possibility to print the hum ratio but would like to see rel
hum as possible for the Zone air relative humidity.

example:

key: Cooling Coil Air Inlet Node
variable name: System Node Relative Humidity
reporting frequency: hourly

Your comment would be greatly appreciated!

Best Regards,

Christian


This message has been scanned for viruses by MailControl - www.mailcontrol.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com.  Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/