[EnergyPlus_Support] Cooling load in displacement ventilation

["ekwtsang" <ernest_tsang@xxxxxxxxxxx>]

I had simulated an example file "displacementvent_1zoneOffice.idf". 
In order to simulate the effect of UCSD model, I removed the section 
of Roomair model and simulated it again. However, I found that when I 
removed the room air model, the zone cooling load decrease while the 
zone supply air flow rate increase. I wonder anything wrong in the 
simulation model or it is too reckless to remove the roomair section 
for the testing.

Regards,
Ernest Tsang



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com.  Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/