[EnergyPlus_Support] modifying weathr file

["zl21e" <zl21e@xxxxxxxxx>]

I am trying to modify the original weather file (.epw) by using the 
actual local weather data.  I can get the following six parameters' 
data by measurement:outside dry bulb temperature (C), outside 
relative humidity (%), wind direction (deg), wind speed (m/s), solar 
beam intensity (w/m2), solar normal flux (w/m2).

My questions are:
1) Besides dew point temperature, what other parameters in the 
weather file can be calculated based on the six parameters mentioned 
above?
2) For the parameters that can not be calculated, how should I treat 
them?  Can I just keep their original value in the weather file?

Thank you!

Li Zhang



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/