[EnergyPlus_Support] Mixing Volume Problem

["itamargoldberger" <cvitamar@xxxxxxxxxxxxxxxxx>]

Hi All
I am running a class + corridor model and I noticed a strange Results:
The Ventilation and Infiltration that enter the zones ( Class1-3 and 
Cor1-3 ) are exact the volume I specified in the idf.
BUT the Mixing air volume (between the Class and corridor) is not the 
same I specified in the idf .

Please enter the file called Adif4_5_N_Det.idf, Run it and see the 
Mixing volume.

Does the Mixing works different from the Ventilation or Infiltration 
methods?

Thanks 
Itamar 



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/