[EnergyPlus_Support] Meteonorm climate data

["Wilde, Pieter de" <P.deWilde@xxxxxxxxxxx>]

Dear all,

I would like to run some simulations in EnergyPlus and compare those with the outcomes of a simplified method based on Meteonorm-data. I am thinking of taking the Meteonorm-dataset and converting this into an epw-file through the weather converter/CSV route; however, that would probably not fill all the datafields in the epw-format. Any suggestions on how to fill in the blanks? Would I be far off by taking an epw-file for the same location and inserting data from that file for missing fields in the converted Meteonorm-file? The whole exercise aims to check the simplified method, which does not take into account these other fields.

Best regards,
Pieter de Wilde

dr.ir. P.J.C.J. de Wilde
TNO Building and Construction Research
PO Box 49, 2600AA Delft, the Netherlands
phone: ++31-15-2763520
fax: ++31-2763022







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/