[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] questions about dx vav system



I have two questions here.

First, I am simulating a VAV system with no terminal reheat. I 
specify the supply air temperature to be 12.8oC in cooling season and 
35oC in heating season. According to results I got, it works well in 
cooling season, trying to keep the indoor temperature under 23oC by 
varing the supply air flow rate. While in winter, it keeps heating 
the space to a high temperature. In heating season, the supply air 
flow rate is always at its maximum value. I can not understand why 
the supply air flow rate in heating season does not vary.

Second question is about the iteration. I am using a multispeed DX 
coil. The program terminates when simulating the system in May. There 
is a fatal error which says the iteration limit is exceeded when 
calculating the speed of the compressor. I have no idea how to 
resolve the problem.

I have uploaded the file named BOX4_VAV.idf to the files area.

Thanks.



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/