[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Controller error messages
I'm having difficulty finding a solution to the following messages:
** Warning ** Did not find "Mixed Air Node 1" in list of Sections
** Warning ** The design coil load is zero for
COIL:Water:SimpleHeating AHU HEATING COIL 1
** ~~~ ** The autosize value for max water flow rate is zero
** ~~~ ** To change this, input a value for UA, change the
heating design day, or lower
** ~~~ ** the system heating design supply air temperature
** Severe ** Missing temperature setpoint for economizer
controller OA CONTROLLER 1:
** Severe ** Node Referenced (in Controller)=MIXED AIR NODE 1
** ~~~ ** use a Set Point Manager to establish a setpoint at
the mixed air node.
Is there an (not so) obvious problem here?
SET POINT MANAGER:MIXED AIR,
Mixed Air Temp Manager 1,
TEMP,
CC Air Outlet Node 1, ! reference node
Mixed Air Node 1, !- Fan_Inlet_Node
CC Air Outlet Node 1; !- Fan_Outlet_Node
Mixed Air Node 1; !- Name of the set point Node or Node
List
Any suggestions would be helpful..
Thanks
Shaun Martin
------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/