[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] another Q about the latent load

Thank you for your answer! 
I have another question about the room latent cooling load when using the "Purchased Air". In my case, the summer design day dry bulb T is 33.2C and wet bulb T is 28.6C; the room T and RH setpoints are 24C and 50% respectively from 7:00am to 10:00pm, and 30C and 80% respectively from 10:00pm to 7:00am, that means there is no air conditioning during that period. The object "TIME STEP IN HOUR" is 6 and the object "SOLUTION ALGORITHM" is MTF. The result that I need is the   "Zone/Sys Sensible Load Predicted" and "Zone/Sys Moisture Load Rate Predicted". For the sensible load, the value of 7:10 is 1324W and that of 7:20 is 651W, this is reasonable because of the starting time of AC, but for the latent load of the same time: 3.53gwater/s and 0.592gwater/s(8626W and 1447W).Why the first one is extremely large than the second? Is it reasonable?

全新 Yahoo! Mail - 100 MB 免費電郵儲存量

[Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: