[EnergyPlus_Support] Radiant Slab Outside Environment

[zhen tian <tianzhen9@xxxxxxxxx>]

Hi:
 
I am simulating a multi-floor building with radiant slab cooling system.  The radiant floor is between two floors.  But I only want to simulate one floor.  For example, the radiant slab is between 2 and 3 floor.  I only want to simlate the 2th floor.  
So how can simulate the 2th floor without simulating the 3rd floor?  Since the radiant floor will have effect on the 3rd floor and the 3rd fllor is conditioned too.
Can I define the foor as adiabatic surface?  Or how can I define the outside environment for the slab surface?
 
Thanks a lot.
 
Regards,
 
Zhen

		
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/